CONTACT INFORMATION : EMAIL johntonkinson@nacomvalve.com (Phone 714 907 2978 )
CONTACT INFORMATION : EMAIL johntonkinson@nacomvalve.com (Phone 714 907 2978 )
This is where we spotlite a specific product we manufacture. It tells you all about that product and why we have selected it for product spotlite of the month. It is posted for 30 days, then changes to the next product spotlite.
THIS MONTHS PRODUCT SPOTLITE IS
NACOM’s ACR SERIES 1-1/2” dia Multivalve pneumatic manifold
NACOM s ACR SERIES MULTIVALVE PNEUMATIC MANIFOLD . 1-1/2” diameter orifice has two 1-1/2” fnpt inlet ports and 6 ea 1.0” fnpt outlet ports . Each valve is independently actuated with the manifold operating at 75 psi forward media pressure with its dual spring piston that allows the manifold to operate at 75 psi on each valve . Note standard pressure rating for this is 30 Psi. This manifold can be repaired while in service and can be up and running by simply removing 4 bolts of specific valve on manifold remove lower port , pull pneumatic housing that jhas attached PTFE bellows , replace bellows , install new lower port ( lower ports opposite side is sealing surface of specific valve , re_assemble 4 bolts and your back up and running. ) Note this is due to poor filtration causing seat damage . NO MORE HAVING TO REPLACE MANIFOLD . Note : This manifold is considered indestructable however poor filtration will cause damage to seating surface on any valve . USE YOUR HEAD ! Poor filtration causes damage . Keep it Clean ! THIS IS 1-1/2" DIA ORIFICE . NO OTHERS CAN SAY THEY HAVE THIS ! 6 VALVES BUILT INTO ONE MANIFOLD ! ALL PTFE SURFACES FOR NO CONTAMINATING EFFECTS . NO ORINGS , ALL VIRGIN PTFE .. ALTHOUGH RATED AT 30 PSI MEDIA PRESSURE WITH THE DUAL SPRING ACTUATING AND SPECIAL PNEUMATIC PISTON FORCE IT WILL HANDLE 75 PSI
Copyright © 2020 NACOMVALVE.COM - All Rights Reserved.
Powered by GoDaddy